Products     POLYESTER RESINS FOR GENERAL PURPOSE ORTHO P100 Orthophthalic resin with good reactivity, good elongation, used for general purpose. Good mechanical characteristics, compatibility with roving and fillers wettability. Clear resin. Recommended for spray up. ■ ■ ■ ■ ■ P106 Orthophthalic resin with medium- low reactivity and medium modulus. Controlled peak. Excellent fillers wettability. ■ ■ ■ ■ ■ P130 Orthophthalic resin with medium reactivity. Good mechanical properties and roving wettability. ■ ■ ■ ■ ■ DCPD P801 DCPD resin with medium reactivity used for general purpose. Low styrene content, excellent dimensional stability, good mechanical properties and roving compatibility. Recommended for spray up systems. ■ ■ ■ ■ ■ P805 DCPD resin with high reactivity. Low styrene content, excellent dimensional stability, mechanical properties, fillers wettability. Recommended for short working cycles. ■ ■ ■ ■ ■ ISO P200 Isophthalic resin with medium reactivity and high modulus, good thermal and chemical resistance. Clear resin. ■ ■ ■ ■ ■ POLYESTER RESINS FOR GELCOAT ORTHO P100 NGSL Orthophtalic resin with medium reactivity and modulus. Excellent colour stability and compatibility with fillers and pigments. UV stabilizated resin. ■     ■   ISO P200 NGSL Isophthalic resin with medium reactivity. Excellent chemical resistance and colour stability, UV stabilized. Good compatibilty with fillers and pigments. ■     ■   POLYESTER RESINS FOR PASTES STYRENE FREE RESINS P166 N Styrene free resin, ideal as a carrier for pigments, with medium viscosity. Good absorbance of pigments and fillers. Good system compatibility. High stability. ■         P167 LV Styrene free resin, ideal as a carrier for pigments, with low viscosity. Good absorbance of pigments and fillers. Excellent system compatibility. High stability. ■         POLYESTER RESINS FOR BUTTONS ORTHO P114 Orthophthalic resin, medium reactivity, high transparency, controlled peak to avoid tensioning. Excellent brilliance. Available low or high viscosity. Recommended for pouring, for sheets and for transparent objects. ■     ■   P114 TSL Orthophthalic resin medium reactivity, thixo, recommended for button-rods. Excellent UV resistance and dyes stability. Excellent brilliance. ■   ■ ■   POLYESTER RESINS FOR SANITARY ORTHO P107 Resin recommended for bathtubs and shower plates, excellent PMMA adhesion, good fillers wettability and compatibility with roving. Low styrene content. Ideal for spray up systems. Resin available in low emission grade (LSE). ■ ■ ■   ■ DCPD P807 Resin recommended for bathtubs and shower plates, excellent ABS adhesion, good fillers wettability and compatibility with roving. Excellent dimensional stability. Ideal for spray up systems. Resin available in low emission grade (LSE). ■ ■ ■   ■ ORTHO P198 Orthophthalic resin for pouring processes. Recommended for toilet seats production. Excellent transparency, medium reactivity: controlled peak to avoid tensioning. Available version with low styrene emission (LSE). ■ ■   ■   ISO/NPG P255 ISO/NPG acrylic modified resin with good resistance to water and light chemicals. Resin with low shrinkage and good mechanical properties. It is recommended for solid surface applications, available the version acrylic modified. ■ ■   ■   POLYESTER RESINS FOR PANELS ORTHO P100 Orthophtalic resin with good reactivity, recommended for flat and corrugated panels. High transparency. Good mechanical properties and compatibility with roving. ■ ■   ■   ORTHO/DCPD P900 Ortho/DCPD resin recommended for hand made panels. Good mechanical properties and compatibility with glass fibers. Resin with a controlled peak. ■ ■   ■ ■ DCPD P802 DCPD resin with low shrinkage and high dimensional stability. ■ ■   ■ ■ POLYESTER RESINS FOR CHIPS ORTHO P108 Orthophthalic resin with medium reactivity, good mechanical resistance and excellent fillers wettability. ■         DCPD P808 DCPD resin with medium reactivity, good mechanical resistance and dimensional stability. Excellent fillers wettability. Low styrene content. ■         DCPD FLEXIBLE P308 Very flexible resin, with low peak and low styrene content. The polymerised resin is soft and dry. Recommended for chips to polish fragile and delicate surfaces. ■         POLYESTER RESINS FOR POLYMER CONCRETE ORTHO P106 Orthophtalic resin with low-medium reactivity, good mechanical and high wetting properties. ■ ■ ■ ■ ■ DCPD P802 NR Resin for polymer concrete with high dimensional stability and good wetting of fillers. ■ ■ ■ ■ ■ P805 N7 DCPD resin with high reactivity and excellent dimensional stability, excellent adhesion and wetting properties. Ideal for short working cycles. ■ ■ ■ ■ ■   POLYESTER RESINS FOR ARTIFICIAL MARBLE DCPD P805 N20 DCPD resin with medium high reactivity and excellent dimensional stability and wetting of fillers. It is recommended for blocks. ■ ■   ■   DCPD P809 DCPD resin with good reactivity, high dimensional stability and fillers wettability. It is recommended for slabs and tiles. ■ ■   ■   POLYESTER RESINS FOR RTM ORTHO P140 Orthophthalic resin with low reactivity and low viscosity recommended for RTM. Good mechanical and wetting properties. Clear resin. ■ ■     ■ DCPD P802 DCPD resin with medium reactivity and low viscosity. Low styrene content, good dimensional stability and compatibility with roving. It is recommended for presses processes. ■ ■     ■ POLYESTER RESINS FOR TANKS & PIPES ORTHO/DCPD P900 Orthophthalic-DCPD resin recommended for filament winding with good mechanical properties and compatibility with roving. ■ ■   ■   DCPD P805 DCPD resin with low monomer content, high modulus, very low shrinkage and good compatibility with roving. Recommended for f.w. in big dimensions. ■ ■   ■   ISO P200 Isophthalic resin with excellent mechanical, chemical and thermal properties. ■ ■   ■   ISO/DCPD P955 ISO/DCPD resin with low styrene content, high modulus, low shrinkage. Recommended for pipes. ■ ■   ■   ISO/NPG P305 ISO/NPG resin with medium reactivity, excellent chemical, thermal and weathering resistance. ■ ■   ■   POLYESTER RESIN FOR PULTRUSION ORTHO P133 Orthophthalic resin with medium reactivity, excellent mechanical properties and compatibility with roving and fillers. ■     ■   ORTHO P180 Orthophtalic resin with high reactivity, excellent mechanical properties and compatibility with roving and fillers. ■         DCPD P803 DCPD resin with high reactivity, good dimensional stability and compatibility with roving. ■     ■   ISO P203 Isophthalic resin with high reactivity. Excellent mechanical, chemical and thermal properties. ■     ■   ECO ARES RESINS (styrene free resins) AND RESINS WITH LOW STYRENE CONTENT ECOARES Acrylic modified polyester resin totally styrene free, with good processability, good reactivity and good mechanical properties. ■ ■ ■ ■   ECOARES Acrylic modified polyester resin with very low styrene content, with good processability, good reactivity and good mechanical properties. ■ ■       RESINS FOR PUTTIES ORTHO P144 N10 Clear resin for putties and mastics. Good adhesion on marble. Good fillers wetting, controlled peak, low shrinkage. ■ ■       ORTHO P100 A12 Very clear resin for putties. Resin accelerated with a special clear accelerator.   ■       DCPD P805 N7 DCPD resin for putties and adhesives. Good adhesion on marble – low shrinkage. Very good wetting of fillers. ■ ■       DCPD P825 N7 DCPD resin for car body putties. Good adhesion on metal. Good wetting of fillers and low shrinkage. It gives a tack-free surface. ■ ■         EPOXY VINYLESTER RESINS V3010 Epoxy based resin with high mechanical properties and excellent chemical resistance. ■ ■ ■     V3018 Vinylester modified resin with good reactivity and high dimensional stability. ■ ■ ■       SPECIAL RESINS P500 Polyester resin with high transparency and excellent weathering properties. ■     ■   P114 ASL15 Resin with high transparency cured with mixed systems UV + peroxide. ■ ■       P180 LP Resin with high reactivity that expands its volume during curing. Used for chemical anchors. ■ ■   ■   P800 TA30PS Resin with very low styrene content for laminating on Polystyrene. ■ ■ ■     P822 NH Resin with very low styrene content for laminating on PVC. ■ ■       P800 NH Resin with low styrene content for laminating on PVC. ■ ■       P300 N20 Resin with high flexibility to improve elongation. It gives a tack-free surface. ■     ■   P305 NSL ISO-neopentilic resin, UV stabilized. High perfomances in chemical resistance and colour stability. ■     ■   P255 N15 ISO/NPG clear resin with very good wetting of pigments and fillers. Good resistance to water and light chemicals. ■     ■     FIRE RETARDANT RESINS Marte presents its fire retardant resins range: ARES® FR With different levels of classification. Technical data sheets available on request. ARES® FR filled ARES® FR clear ARES® FR halogenated ARES® FR halogen freea

Company info  |  Site map  |  VAT Number 00936790963